| REGISTER-LOGIN | PRODUCTS | CROSS REFERENCE | INVENTORY | REQUEST QUOTE | ORDER ONLINE | SITE MAP |
 |
SMSLS320-03 - BARE DIE |
| GOLD CHIP TECHNOLOGY™ | HIGH INPUT IMPEDANCE BiFET AMPLIFIER |
| FEATURES | APPLICATIONS | BiFET Amplifier - BARE DIE |
|
HIGH INPUT IMPEDANCE rGs = 100GΩ HIGH TRANSCONDUCTANCE YFS = 30mS Low Noise (25uV=typ) Low Capacitance (crss= 1.5pf max) Single Chip - Monolithic Construction Ideal For Low Power/Battery Applications Ideal for Piezo Electric Sensing Applications Direct Replacement for Amperex LTA-320 and Linear Integrated Systems LS320 High reliability bare die Gold metallization RoHS compliant, Lead Free Compatible with chip and wire assemblies |
Accelerometer Amplifiers Differential Amplifiers Electrometers Force and Preasure Sensors Hydrophone Amplifier Infrared Amplifiers Quartz and Piezo Ceramic Amplifiers Source Follower Unity Gain Buffer Amplifier High Impedance Sense Amplifier Applications Chip on Board System in package SIP Hybrid Circuits |
|
| HIGH INPUT IMPEDANCE BiFET AMPLIFIER - PRODUCT DESCRIPTION |
|
BiFET or Bipolar Field Effect Transistor as an amplifying device comprises a field effect transistor-bipolar transistor pair.
Such a device combines the main desirable features of both field effect transistors and bipolar transistors, therefore,
having a high input impedance that is typical of FETs and a high transconductance (or high current gain) which is typical
of bipolar transistors. BiFET Amplifiers Integrated Circuits BD series products available in die form are ideal for high reliability hybrid circuits and multi chip module applications. |
| HIGH RELIABILITY BARE DIE AND SYSTEM IN PACKAGE - SHORT APPLICATION NOTE |
| COB (Chip on Board) and SiP (System-in-Package) are integrating proven mature products in bare die of mixed technologies i.e. Si, GaAs, GaN, InP, passive components, etc that cannot be easily implemented in SOC (System-on-Chip) technology. COB and SiP have small size footprint, high density, shorter design cycle time, easier to redesign and rework, use simpler and less expensive assembly process. For extreme applications the bare die has to withstand also harsh environmental conditions without the protection of a package. KGD, Known Good Die concept is no longer satisfactory if the die cannot withstand harsh environmental conditions and degrades. Standard semiconductor devices supplied by many manufacturers in bare die are build with exposed aluminum pads that are extremely sensitive to moisture and corrosive components of the atmosphere. Semiconix has reengineered industry standard products and now offers known good die for bare die applications with gold interconnection and well-engineered materials that further enhance the die reliability. Semiconix also offers Silicon Printed Circuit Board technology with integrated passive components as a complete high reliability SIP solution for medical, military and space applications. See AN-SMX-001 |
| DISCRETE SEMICONDUCTORS MANUFACTURING PROCESS |
| Discrete semiconductors are manufactured using Semiconix in house high reliability semiconductor manufacturing processes. All semiconductor devices employ precision doping via ion implantation, silicon nitride junction passivation, platinum silicided contacts and gold interconnect metallization for best performance and reliability. MNOS capacitors, Tantalum Nitride TaN or Sichrome SiCr thin film resistors are easily integrated with discrete semiconductors on same chip to obtain standard and custom complex discrete device solutions. |
| ABSOLUTE MAXIMUM RATINGS @ 25 °C (unless otherwise stated) | |||
| Parameter | Symbol | Value | Unit |
| Maximum Storage Temperature | TSTG | -65 to +150 | °C |
| Maximum Operating Junction Temperature | TJ | -55 to +125 | °C |
| Maximum Continuous Power Dissipation @ +125 °C | PD | 200 | mW |
| Maximum Drain Current | ID | 25 | mA |
| Maximum Voltages Drain to Source1 | VDSO | 20 | V |
| Maximum Voltages Gate to Source | VGSS | 20 | V |
| Electrical Characteristics* TC = 25°C unless otherwise noted | ||||||
| Name | Symbol | Test Conditions | Value | Unit | ||
| Min. | Typ. | Max | ||||
| Drain to Source Voltage | VΔS | IDS= 100µA, VGS= 0V | -20 | V | ||
| Gate to Source Voltage | VGS | IDS= 10mA, Vgs= -10V2,3 | -12 | -10 | -7 | V |
| Common Source Forward Transconductance | gfs | IDS= 10mA, VDS= -10V, f= 1kHz | 30000 | µS | ||
| Common Source Output Conductance | goss | IDS= 10mA, VDS= -10V, f= 1kHz | 300 | µS | ||
| Gate to Source Input Resistance | rGs | VGS= 0 to 20V, TJ to 125 °C | 100 | GΩ | ||
| Input Capacitance | CISS | IDS= 10mA, VDS= -10V | 8 | pF | ||
| Reverse Transfer Capacitance | CRSS | IDS= 10mA, VDS= -10V | 1.5 | pF | ||
| Noise Voltage | en | IDS= 10mA, VDS= -10V, BW= 50 to 15kHz | 25 | µV | ||
|
1. Absolute maximum ratings are limiting values above which serviceability may be impaired. 2. The gate to source voltage must never exceed 100V, t<10ms. |
||||||
| SPICE MODEL | ||||||
| Spice model pending. | ||||||
| CROSS REFERENCE PARTS: Amperex LTA-320, Linear Integrated Systems LS320 | ||||||
| GENERAL DIE INFORMATION | ||||||||||||||||||||||
| Substrate | Thickness [mils] |
Die size [mils] |
Bonding pads | Backside metallization | ||||||||||||||||||
| Silicon | 6±1 | 40x20±2 | Pad metal is TiW/Au, 4µm±1 thick, 99.99% electroplated gold with TiW barrier. Custom metallization available upon request. |
|
||||||||||||||||||
| LAYOUT / DIMENSIONS / PAD LOCATIONS | ||
|
||
|
 LAYOUT PENDING |
|
|
||
| SEMICONDUCTOR ASSEMBLY PROCESS - SHORT APPLICATION NOTE |
|
Semiconix standard bare die components are designed for thermosonic GOLD wire bonding and AuSi eutectic die attach. For AuSn or AuGe die
attach process, Ti/Pt/Au or Ti/Pd/Au are recommended backside metallization. For soft solder die attach, backside metallization may be any of Ti/Ni/Au, Ti/Pt/Au, Ti/Pd/Au. For silver filled conductive epoxy die attach, AuSi as well as Ti/Ni/Au, Ti/Pt/Au, Ti/Pd/Au may be used. In general, after die attach, prior to wire bonding operation an oxygen RF plasma clean operation is recommended. IMPORTANT NOTE: Aluminum wire should not be used with gold pads due to potential reliability problem known as purple plague. Same it applies to Aluminum bonding pads with gold wire! In the transition from SnPb solder to lead free and RoHS compliant packaging and assembly processes the reflow temperature has increased in some cases from 180°C to 220°C. This may cause an increase of the rate of formation of gold aluminum intermetallic compounds that are brittle and are conducive to increased contact resistance and or bond failure. See Application note AN-SMX-000. |
| STANDARD PRODUCTS ORDERING INFORMATION |
| SMS P/N | WAFFLE PACKS | QUANTITY | U/P($) | FILM FRAME | MIN QUANTITY | U/P($) |
| SMSLS320-03-BD | -WP | 10000 | -FF | 19000 | ||
| SMSLS320-03-BD | -WP | 50000 | -FF | 95000 |
| PRICES - Listed prices are only for standard products, available from stock. Inventory is periodically updated. List prices for other quantities and tolerances are available on line through Instant Quote. For standard products available from stock, there is a minimum line item order of $550.00. No rights can be derived from pricing information provided on this website. Such information is indicative only, for budgetary use only and subject to change by SEMICONIX SEMICONDUCTOR at any time and without notice. |
| LEAD TIMES - Typical delivery for standard products is 4-6 weeks ARO. For custom devices consult factory for an update on minim orders and lead times. |
| CONTINOUS SUPPLY - Semiconix guarantees continuous supply and availability of any of its standard products provided minimum order quantities are met. |
| CUSTOM PRODUCTS - For custom products sold as tested, bare die or known good die KGD, there will be a minimum order quantity MOQ. Dice are 100% functional tested, visual inspected and shipped in antistatic waffle packs. For high volume and pick and place applications, dice are also shipped on film frame -FF. For special die level KGD requirements, different packaging or custom configurations, contact sales via CONTACTS page. |
| SAMPLES - Samples are available only for customers that have issued firm orders pending qualification of product in a particular application. |
| ORDERING - Semiconix accepts only orders placed on line by registered customers. On line orders are verified, accepted and acknowledged by Semiconix sales department in writing. Accepted orders are non cancelable binding contracts. |
| SHIPING - Dice are 100% functional tested, visual inspected and shipped in antistatic waffle packs. For high volume and pick and place applications, dice are also shipped on film frame -FF. |
| DISCLAIMER - SEMICONIX has made every effort to have this information as accurate as possible. However, no responsibility is assumed by SEMICONIX for its use, nor for any infringements of rights of third parties, which may result from its use. SEMICONIX reserves the right to revise the content or modify its product line without prior notice. SEMICONIX products are not authorized for and should not be used within support systems, which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent. |
| HOME | PRODUCT TREE | PACKAGES | PDF VERSION | SEARCH |
| SEMICONIX SEMICONDUCTOR | www.semiconix-semiconductor.com Tel:(408)758-8694 Fax:(408)986-8027 |
SEMICONIX SEMICONDUCTOR |
| Last updated:July 06, 2009 | Display settings for best viewing: | Current display settings: |
| Page hits: 1 | Screen resolution: 1124x864 | Screen resolution: |
| Total site visits: | Color quality: 16 bit | Color quality: bit |
| © 1990-2024 SEMICONIX SEMICONDUCTOR All rights reserved. No material from this site may be used or reproduced without permission. | ||